1. A-Z İndeks

Prof. Dr. Yücel GENÇER
Malzeme Bilimi ve Mühendisliği

Yücel GENÇER
Telefon
(262) 605 26 64
E-Posta
gencergtu.edu.tr
Web sayfası
http://www.gtu.edu.tr/personel/1040/10118/ycel-gener.aspx
Ofis
H Blok, 111
Çalışma alanları
Metalik Malzemeler, biyomalzemeler, Al, Mg, Ti, Zr, Fe ve Alaşımlarının Yüzey Özelliklerinin Geliştirilmesi, Mikroark Oksidasyon, Borlama, Alaşım Geliştirme, Döküm, Plazma Yüzey Modifikasyon

Journal / Uluslararası Hakemli Dergiler (SCI and SCI Expanded)

  1. Gunduz, K.O., Oter, Z.C.,Tarakci, M., Gencer, Y., (2017), Plasma electrolytic oxidation of binary Mg-Al and Mg-Zn alloys , Surface and Coatings Technology, 323. 72-81.
  2. Sezgin Cengiz ,Yunus Azakli, Mehmet,Tarakci, Lia Stanciu, Yucel Gencer,(2017),; Microarc oxidation discharge types and bio properties of the coating synthesized on zirconium Materials,Science and Engineering: C, 77, 374-383.
  3. Sezgin Cengiz, Aytekin Uzunoglu, Lia Stanciu, Mehmet Tarakci,Yucel Gencer, (2016),
    Direct fabrication of crystalline hydroxyapatite coating on zirconium by single-step plasma electrolytic oxidation process,Surface and Coatings Technology, 301, 74-79.

  4. Cengiz, S., Azakli, Y, Yazici, M., Gayretli, B., Gencer, Y., Tarakci, M. (2016) Effects of the Addition of Calcium Acetate into Silicate-Based Electrolytes on the Properties of MAO
    Coatings Produced on Zirconium, Acta Phyica Polonica A, 129(4), 504-508.

  5. Gulec, A. E., Oter, Z. C., Gunduz, K. O., Tarakci, M., Gencer, Y. (2016), Characterization of Ternary Mg-Sn-Mn Alloys Acta Phyica Polonica A, 129(4), 596-599.

  6. Yunus Azakli, Sezgin Cengiz, Mehmet Tarakci, Yucel Gencer, (2016), Characterisation of boride layer formed on Fe–Mo binary alloys, Surface Engineering, Vol 32:8, 589-595.

  7. S. Cengiz, Y. Gençer, M. Tarakçı, Y. Azaklı (2015), Influence of Copper Amount on the Pack Boronizing Behaviour of Fe-Cu Binary Alloys, Gazi Üniv. Müh. Mim. Fak. Der., 30 (3), 339-349.

  8. Zafer Cagatay Oter,, Yucel Gencer, Mehmet Tarakci (2015), The characterization of the coating formed by Microarc oxidation on binary Al–Mn alloys, Journal of Alloys and
    Compounds, Volume 650, 25 November 2015, Pages 185-192.

  9. S. Cengiz,M. Yazici,Y.Gencer, M. Tarakci,(2015), Characterization of Coating Formed on Pure Zirconium by MAO in Yttrium Acetate Tetrahydrate Containing Electrolyte, Acta Phyica Polonica A, 127, 1320-1325.

  10. Y.Azakli, K.O. Gunduz, M. Tarakci, Y.Gencer, A Comparative Study on Boride Layer Morphology of Fe-4Co, Fe-4V and Fe-4W Binary Alloys, Acta Phyica Polonica A, Volume: 127, 1326-1330.

  11. Z.C.Oter, A.E. Gulec, Y. Gencer, M.Tarakci (2015), Micro Arc Oxidation of Al-4Si, Al-4Mn and Al-4Mg Binary Alloys,;Acta Phyica Polonica A, Volume: 127, 1331-1335.

  12. Musa Gogebakan, Celal Kursun, Kerem Ozgur Gunduz, Mehmet Tarakci, Yucel Gencer(2015), Microstructural And Mechanical Properties Of Binary Ni-Si Eutectic Alloys, Journal of Alloys and Compounds, Journal of Alloys and Compounds, Volume: 643, Supplement 1, S219–S225.

  13. Celal Kursun,;Musa Gogebakan, Yucel Gencer(2015), Microstructural characterization of rapidly solidified Cu50Zr40Ni5Ti5 amorphous alloy,Journal of Alloys and Compounds, Volume: 643, Supplement 1, S33–S38.

  14. Ali Emre Gulec, Yucel Gencer, Mehmet Tarakci, (2015) "The characterization of oxide based ceramic coating synthesized on Si binary alloys by microarc oxidation",Surface and Coatings Technology, 269, 100–107 (doi:10.1016/j.surfcoat.2014.12.031)

  15. Y. Gencer; M. Tarakci, A.E Gulec, Z. Ç. Oter (2014), “Plasma Electrolytic Oxidation of Binary Al-Sn Alloys”, Acta Phyica Polonica A, Volume:125, 659-664.

  16. Sezgin Cengiz,;Yucel Gencer(2014), “The characterization of the oxide based coating synthesized on pure zirconium by plasma electrolytic oxidation”, Surface and Coatings Technology,242, 132–140

  17. Tarakci, M.,Gencer,Y., Azakli, Y., Sahinturk, U.(2013), Surface Modification of Fe-8Si Alloy by Boronizing and Its Characterization, Journal Of The Faculty Of Engineering And Architecture Of Gazi University, Volume: 28,645-655.

  18. Avar, B., Gogebakan, M.,Tarakci, M.,Gencer, Y., Kerli, S., (2013), Microstructural investigations of rapidly solidified Al-Co-Y alloys, Advances in Materials Science and
    Engineering,Volume 2013, Article number 163537. http://dx.doi.org/10.1155/2013/163537.

  19. Kerem Ozgur Gunduz,Yucel Gencer, Mehmet Tarakci, Adnan Calik (2013), “The effect of vanadium on the boronizing properties of pure iron”, Surface and Coating Technology,Volume: 221, 104–110.

  20. S. Cengiz, M. Tarakci,Y. Gencer, A.O. Devecili and Y. Azakli, (2013), “Oxide Based Ceramic
    Coating on Al-4Cu Alloy by Microarc Oxidation”, Acta Phyica Polonica A, Volume: 123, 445-448.

  21. A. Calik,Y. Gencer, M. Tarakci, K.O. Gunduz and A.E. Gulec, (2013), “Boriding of Equiatomic Fe-Mn Binary Alloy”, Acta Phyica Polonica A, Volume: 123, 449-452.

  22. Yücel Gençer, Ali Emre Gulec (2012), The Effect of Zn on the microarc oxidation coating behavior of synthetic Al-Zn binary alloys Journal of Alloys and Compounds, 525, 159-165.

  23. Yücel Gençer, Mehmet Tarakçı, Sezgin Cengiz (2011), Saf Zirkonyumun Mikroark Oksidasyon Yöntemiyle Oksit Esaslı Seramik Kaplanması, Gazi Üniv. Müh. Mim. Fak. Der., 26 (4), 851-860.

  24. Y. Gencer, M. Tarakci, S.Cengiz, K.O. Gunduz (2011),The Effect of Sodium Silicate Concentration on the Properties of the Coating Formed on Pure Zirconium by Microarc Oxidation Coating Technique, Advanced Materials Research, 445, 637-642.

  25. Yucel Gencer(2011), Influence of Manganese on the Pack Boriding Behaviour of Pure Iron, Surface Engineering, 27 (8), 634-638.

  26. Mehmet Tarakci,Yucel Gencer, Adnan Calik (2010), The pack-boronizing of pure vanadium under a controlled atmosphere, Applied Surface Science, 256, 7612-7618.

  27. Gencer Y, Tarakci M, Calik A (2008), Effect of titanium on the boronizing behaviour of pure iron, Surface and Coatings Technology, 203, 9-14.

  28. HS Soykan ,Y Gencer(2007), Microstructural characterization of ballistic damage in dry pressed alumina ceramics,Praktısche Metallographıe-Practıcal Metallography, 44 (8), 385-392.

  29. S.Arici, M. Ozer, N.Arici,Y. Gencer, (2006), Effects of sandblasting metal bracket base on the bond strength of a resin-modified glass monomer cement: an in vitro study, Journal of Materials Science: Materials in Medicine,160; 17(3), 253-258.

  30. M. Tarakci, K. Korkmaz,;Y. Gencer and M. Usta (2005). Plasma electrolytic surface carburizing and hardening of pure iron, Surface and Coatings Technology 199, 205-212.

  31. G.Greenwood and;Y.Gencer;(2000). The Reversibility of Creep Strain at Low Stresses and Low Temperatures, Key Engineering Materials, 171-174, 197-204.

Journal / Uluslararası Hakemli Diğer Dergiler

  1. Çağrı Ural,Yücel Gencer, Mehmet Tarakçı, Muhammed Ali Aslan, Selim Arıcı, Numan Tatar (2014), Effect of bleaching agents on surface texture of feldspathic ceramic, Journal of Experimental and Clinical Medicine, Volume: 31,177-181.

International Proceedings / Uluslararası Bilimsel Toplantılar

  1. Mehmet Yazici, Yunus Azakli,Sezgin Cengiz, Yücel Gencer, Mehmet Tarakci, “Effect of Zn on the Improvement of Corrosion Performance of MAO Coated Biodegradable Mg-Sr-Zn Alloys”, 44th International Conference on Metallurgical Coatings and Thin Films (44th ICMCTF 2017) 24-28 April 2017, San Diego, CA, USA.
  2. Mehmet Yazici, A, Emre Gulec, Mevlut Gurbuz, Yücel Gencer, Mehmet Tarakci, “Corrosion and Antibacterial Properties of Micro-Arc Oxidized Biodegradable Mg-Sr Alloys for Biomedical Applications”, 44th International Conference on Metallurgical Coatings and Thin Films (44th ICMCTF 2017) 24-28 April 2017, San Diego, CA, USA(Poster).
  3. Mehmet Tarakci, Yucel Gencer, “The Effect of Alloy Element Chromium on The Boronizing Behavior of Pure Iron”, Third International Iron Steel Symposium, (UDCS’17), 3-5 April 2017, Karabük, Turkey.
  4. Yucel Gencer, Naim Burak Mackan, “Characterization of Boride Layer Formed on Fe-Ni Alloys”, Third International Iron Steel Symposium, (UDCS’17), 3-5 April 2017, Karabük, Turkey
  5. Mehmet Tarakci, Yunus Azakli, Sezgin Cengiz, Mehmet Yazici, Yucel Gencer, “Characterization of Biodegradable Fe-Co alloys”, Third International Iron Steel Symposium, (UDCS’17), 3-5 April 2017, Karabük, Turkey.
  6. Cengiz S, Azakli, Y., Tarakci M., Stanciu L., Gencer, Y. The Effect of Final Voltage on the Surface Morphology-Chemistry of PEO treated Zirconium, 18th International Metallurgy and Materials Congress (IMMC2016), İstanbul, Turkey, 26 Sep-01 Oct. 2016.
  7. Sürmen O., Tarakçı, M., Gençer, Y., Zeytin, S., Improvement of Heat Treatment Application of Aluminum Forged Parts, 18th International Metallurgy and Materials Congress (IMMC2016), İstanbul, Turkey, 26 Sep-01 Oct.. 2016.
  8. 3Cengiz, S., Uzunoglu, A, M. Tarakci, M. Gencer, Y., Stanciu, L., The Effect of Plasma Electrolytic Oxidation Parameters on Coating Morphology and Corrosion Behavior, 229th The Electrochemical Society Meeting (ECS), San Diego, California, USA, May 29th - June 2nd, 2016.
  9. Tarakçı, M., Gençer, Y., 50Fe-50Co Alaşımının Borlanması ve Karakterizasyonu, 16th International Materials Symposium (IMSP'2016), Denizli, Turkey, 12-14 October 2016.
  10. Gençer, Y., Tarakçı, M., Atomik Olarak Eşit Miktarda Demir ve Krom İçeren Fe-Cr İkili Alaşımın Borlanması, 16th International Materials Symposium (IMSP'2016), Denizli, Turkey, 12-14 October 2016.
  11. Mehmet Yazıcı, Yunus Azaklı,YucelGencer, Characterization of a Wide Range Binary Mg-Sr Alloys, Advances in Materıals and Processıng Technologıes (AMPT 2015), 14-17 December 2015, Madrid, Spain.

  12. Ali Emre Gulec, Zafer Cagatay Oter, Kerem Ozgur Gunduz, Mehmet Tarakci, Yucel Gencer,Characterization of Ternary Mg-Sn-Mn Alloys, 5thThe International Advances in Applied Physics and Materials Science Congress(AMPAS2015), April 16-19, 2015, Fethiye, Turkey.

  13. S. Cengiz,B. Gayretli, M. Yazici,Y. Azakli, Y. Gencer, M. Tarakci,"Effect of Calcium Acetate Addition in silicate based electrolyte on properties of MAO coatings produced on Zirconium",5thInternational Advances in Applied Physics and Materials Science
    Congress(AMPAS2015), April 16-19, 2015, Fethiye, Turkey.

  14. Musa Gogebakan, Celal Kursun,Mehmet Tarakci, Yucel Gencer,“Microstructural and Mechanical Properties of Binary Eutectic Ni-Si Alloys”, 21st International Symposium
    on Metastable, Amorphous and Nanostructured Materials ISMANAM-2014,P1-005, Cancun, Mexico.

  15. S. Cengiz, M. Yazici, Y. Gencer, M. Tarakci, Characterization of Coating Formed by MAO on Pure Zirconium in Yttrium Acetate Tetrahydrate Containing Electrolyte,4th The International Advances in Applied Physics and Materials Science Congress APMAS-2014, April, 24-27, 2014. Fethiye, Turkey.

  16. Z.C. Oter, A. E. Gulec, Y. Gencer, M. Tarakci, Micro Arc Oxidation of Al-4Si, Al-4Mn and Al-4Mg Binary Alloys, 4thThe International Advances in Applied Physics and Materials Science Congress APMAS-2014, April 24-27, 2014. Fethiye, Turkey

  17. Y. Azaklı, K. O. Gunduz, M.Tarakci, Y.Gencer, The Change of Boride Layer Morphology with The Addition of W, V and Co into Pure Iron, 4th The International Advances in Applied Physics and Materials Science Congress APMAS-2014, April 24-27, 2014. Fethiye, Turkey.

  18. Y.Gencer, M.Tarakci, A. E.Gulec, Z. C.Oter, Plasma Electrolytic Oxidation of Al-Sn Binary Alloys, 3rd International Advances in Applied Physics and Materials Science APMAS-2013,April 24-28, 2013. Antalya, Turkey.
  19. Sezgin Cengiz,Yücel Gencer, Mehmet Tarakci,Adnan Calik,"Alloying Elements Effects on the Boride Layer Microstructure of Pure Iron"; 14th International Materials Symposium (IMPS' 2012),Denizli, Turkey, October 10-12(2012)

  20. Çagri Ural, Yucel Gencer, Mehmet Tarakci, Muhammed Ali Aslan, Selim Arici, Effect of bleaching agents on surface texture of feldspathic ceramic, 36th Annual Conference of the European Prosthodontic Association, 6-8 September 2012, Rotterdam, Netherland.

  21. Y. Azaklı, M. Tarakçı, Y. Gencer, A. Çalık, Pack Boronizing of Binary Fe-8Mo Alloy International Iron and Steel Symposium, 02-04 April 2012, Karabük, Turkey, 659-664.

  22. A. Çalık, A. E. Gulec, Y. Gencer, M. Tarakçı, Boronizing Of Synthetıc Fe-16Mn Alloy, International Iron and Steel Symposium, 02-04 April 2012, Karabük, Turkey, 667-672.

  23. S. Cengiz, M. Tarakci, Y. Gencer, O. Devecili, Y. Azakli, Oxide Based Ceramic Coating on Al-4Cu alloy by Microarc Oxidation, 2nd Advanced In Applied Physics And Materials Science Congress, APMAS 2012, April 26-29, 2012. Antalya, Turkey.

  24. A. Calik, Y. Gencer, M. Tarakci, K. O. Gunduz, A. E. Gulec, Boriding of Equiatomic Fe-Mn Binary Alloy, 2nd Advanced In Applıed Physıcs And Materials Science Congress, APMAS 2012, April 26-29, 2012. Antalya, Turkey.

  25. Y. Gencer, M.Tarakci, K. O. Gündüz, S. Cengiz, A. Calik, Pack Boronizing of Fe-8V Alloy and Pure Iron, 6th International Advanced Technologies Symposium(IATS’11), 16-18 May 2011, Elazığ, Turkey, Vol-8, 559-564.

  26. Y. Gencer, M.Tarakci, S.Cengiz, K. O. Gündüz, The Effect of Sodium Silicate Concentration on the Properties of the Coating Formed on Pure Zirconium by Microarc Oxidation Technique, 14th Internatıonal Conference on Advances in Materıals and Processıng Technologıes (AMPT 2011), 13-16 July 2011,Istanbul, Turkey.

  27. S Arici, Y Gencer, M. Tarakçı, A Öz, Frictional Behaviour of Thin Film Coated Orthodontic Brackets and Archwires, 85th Congress of the European Orthodontic Society, June 10–14, 2009, Finlandia Hall, Helsinki, Finland.

  28. B Akdeniz, Y Gencer, M. Tarakçı, S Arici, “Titanium Nitride, Aluminium Oxide and Chromium Nitride Thin Film Coatings of Orthodontic Brackets and Archwires”, 85th Congress of the European Orthodontic Society June 10–14, 2009, Finlandia Hall, Helsinki,
    Finland, 124

  29. S.Arici, M.Özer, N.Arici, Y.Gencer, Kumlamanin resin ile modifiye edilmis bir cam iyonomer siman ve mesh-tabanli metal arasindaki baglantiya etkisi”, 8.Uluslararasi Türk Ortodonti Sempozyumu, 12-14 Ekim 2003, Konya.

National Proceedings / Ulusal Bilimsel Toplantılar


  1. Cengiz, S., Uzunoglu, A.,Huang, S.M., Tarakci, M.,Stanciu, L., Gencer, Y., Preparing of Different Morphology Ceramic Coating for Improved Biocompatibility of Orthopedic-Dental Biomaterial, GTU Fen Bilimleri Lisansüstü Araştırmalar Sempozyumu ve Tanıtım Günleri, Gebze-Kocaeli, Mayıs 2016.
  2. Sezgin Cengiz, Yunus Azaklı, Z.Çağatay Öter, Yücel Gençer, Mehmet Tarakçı, ''Saf Alüminyumun MAO Yöntemiyle Kaplamasına Alümina İçeren Elektrolitin Etkisi'' 5. Alüminyum Sempozyumu (ALUS'05), İstanbul, 13-14 Ekim 2011, 282-295

  3. Yücel Gençer, Mehmet Tarakçı, Sezgin Cengiz, Soydan Alkan (2010),“5052 Al Alaşımının Mikroark Oksidasyon Tekniği İle Kaplanması Ve Karakterizasyonu”, İleri Teknolojiler Çalıştayı ve Sergisi (İTÇ 2010), Ed. M Oktay Anliak ve diğerleri, 30 Nisan 2010, Kocaeli, 51-58.

  4. Mehmet Tarakçı, Yücel Gençer, Sezgin Cengiz, Yunus Azaklı, “Saf Alüminyum Ve Al-2fe Alaşımının Miikroark Oksidasyon Yöntemi İle Kaplanması”, İleri Teknolojiler Çalıştayı ve Sergisi (İTÇ 2010), Ed. M Oktay Anliak ve diğerleri, 30 Nisan 2010, Kocaeli, 115-124.

  5. Mehmet Tarakçı, Yücel Gençer, Kerem Özgür Gündüz, “Darbeli-DC Manyetik Alanda Reaktif Sıçratma Yöntemi İle İnce CrxNy Film Oluşumuna N2/Ar Akış Oranı Ve Altlık Malzeme Sıcaklığının Etkisi”, İleri Teknolojiler Çalıştayı ve Sergisi (İTÇ 2010), Ed. M Oktay Anliak ve diğerleri, 30 Nisan 2010, Kocaeli, 105-113.

  6. Çelik H., Yıldırım M.M.,Y. Gençer, Makina Elemanlarının Tribolojik Dizaynı ve Aşınma Etkilerine Dayanıklı Malzeme Seçimi, 5.Denizli Malzeme Sempozyumu, Nisan 1993,Denizli, Cilt 2, 422-428

Books / Kitap

  1. Gençer, Y. (2016)Sıcak Daldırmayla Galvanizleme El Kitabı (Maass, P.(Editor),Peißker, P.(Editor),Ahner, C.(Translator), 2011, Handbook of Hot-dip Galvanization, Wiley, 1. Basımdan çeviri), Çeviri Editörü:Prof. Dr. Recep ARTIR, Bölüm: 4, 93-124, Bölüm:9-10, 301-365

Sosyal Ağlar

Yucel Gencer @ Researchgate

1. Ahmet Oktay DEVECİLİ, 2009, Al-Cu Alaşımlarının Mikroark Oksidasyon Tekniği ile Yüzey Sertleştirilmesi, GYTE Fen ve Mühendislik Bilimleri Enstitüsü

2. Utkan Şahintürk, 2011, Fe-Si İkili Alaşımlarında Artan Silisyum Miktarının Borlanma Özelliklerine Etkisi, GYTE Fen ve Mühendislik Bilimleri Enstitüsü

3. Kerem Özgür Gündüz, 2011, İkili Fe-V Alaşımlarında Artan Vanadyum Miktarının Borlanma Özelliklerine Etkisi, GYTE Fen ve Mühendislik Bilimleri Enstitüsü

4. Sezgin Cengiz, 2012, Saf Zinkoryum’un Mikroark Oksidasyon Tekniği İle Kaplanması, GYTE Fen ve Mühendislik Bilimleri Enstitüsü

5. Ali Emre Güleç, 2012, Sentetik Al-Si ikili alaşımlarının plazma elektrolit oksidasyon (PEO) tekniği ile kaplanması, GYTE Fen ve Mühendislik Bilimleri Enstitüsü

6. Zafer Çağatay Öter, 2014, Sentetik Al-Mn Alaşımlarının Mikroark Oksidasyon Tekniği ile Kaplanması, GYTE Fen ve Mühendislik Bilimleri Enstitüsü

7. Mehmet Akbaş, Devam Ediyor, Alaşım Elementi Olarak Kalay İlavesinin Saf Alüminyumun Mikroark Oksidasyon ile Kaplama Davranışına Etkisi, GYTE Fen ve Mühendislik Bilimleri Enstitüsü

  • Doktora: 2002 Materials Science and Engineering, The University of Sheffield, Sheffield, UK
  • Yüksek lisans: 1994 Metalurji, Fırat Üniversitesi, Elazığ, Türkiye
  • Lisans: 1990 Metalurji Mühendisliği, Orta Doğu Teknik Üniversitesi, Ankara,Türkiye
Size daha iyi hizmet verebilmek için sitemizde çerezlere yer veriyoruz. Çerezlerle ilgili detaylı bilgi için çerez politikamıza göz atabilirsiniz. Detaylı bilgi için tıklayınız. Kabul ediyorum